60%

fits Kohler Engine REBUILD KIT FOR all K181 piston std w/gaskets for 8hp Kohler

Share On:

Original price was: $61.59.Current price is: $36.95.

Category:
Meta:
Brand : Kohler
MPN : Does Not Apply
Product Type : Engine rebuild
Horsepower : 8 HP
Lawn Mower Type : Lawn Mower Parts & Accessories
Model : K181 M8
Power : Gas
Type : Engine
gtin13 : Does not apply
UPC : Does not apply

8horse power K181 kohler with standard piston, rings and gaskets with seals as shown in the picture The suffix does not matter. EXAMPLE: K181 is the same as a K181s and so on. If you are buying over size piston the machine shop must have the piston before they can bore the cylinder. If they try and bore your cylinder before they have your new piston, GO to a different machine shop because they do not know what they are doing. 1. Take block to machine shop so they can measure the cylinder and they will tell you what size to purchase. 2. Order your NEW piston and take it to the machine shop. 3. The machine shop measures the NEW piston and add in the tolerances then bores the cylinder according to the piston size. This is how it is done and you have to make sure it is done this way if you want it to be correct and last for years and years to come. They have gone on mowers and pulling tractors all over the world! This is for all the K181 and M8 All Parts are HIGH QUALITY PARTS, as PURCHASED THRU STENS/ROTARY KIT INCLUDES THE FOLLOWING: 1- New Piston: ***PISTON COMES IN: Standard, I do have std, 010, 020 and 030 in my auctions Piston Rings. Wrist pin and Keepers. Complete Gasket Set. Engine Seals. FREE!! I also give you the torque specs with your purchase. The 8 hp is HEAD AT 15-20 FT LBS, rod at 140 inch lb FREE!! instructions on how to properly install your connecting rod.(The oil hole on the rod goes towards the cam) *The most common reason for premature engine failure on your rebuilt engine is an improper rod installation. In my other auctions, I also offer high Quality, cost saving tools and other COMPLETE Engine Rebuild, Crank bearings are around $49.99 for two -AVAILABLE IN MY STORE Valve guides are around $17.50 Extra Points plunger or also called points pin is around $19.99 (Kohler OEM) Governor gear (kohler OEM) is $69.99 Standard rod $32.00

Related products