Function description 1. Automatic Charge control function: By setting the volt-HI:‘UP’ volt-LI:‘dn’;When the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed once; 2. Charge Time Control Function: How to turn on the time control function? After entering the parameter set, set the parameter op is non-zero, then turn on the time control function, op default parameter is:–:–h, the default does not turn on time control function; After the opening Time control function (OP is non-zero), when the battery voltage is the lower volt-LI’dn’, the charger began to charge the battery, the system began to clock; During the timing, the battery voltage ≥ volt-HI’UP’, relay disconnect; If the OP time is up, the battery voltage is still the lower volt-LI’dn’, the relay keeps the conduction, automatically closes the charge time control function, and flashes the H:ER to remind the user, the time parameter setting is unreasonable; Press any key to stop flashing; Note: Time format: 00:59 (00 for hours, 59 for minutes) The maximum time is 99:59, which is 100 hours. 3. Serial data upload and parameter setting function: The system supports UART data upload and parameter setting UART:115200,8,1 Cmd Func on Relays enable to open off Relays disable to open start Start data upload stop Stop data upload read Read the param setting dw10.0 Set volt-LI:’dn’ up20.0 Set volt-HI:’UP’ xx:xx Set the charge time OP 00:00 stop charge time Data Upload message Format: Battery voltage + battery percent + charge time + charge status 12.0V,020%,00:10,OP Parameter Setting a) Press and hold the SET key to enter the setting interface; b) Switch the parameters you want to set by short press SET; c) After the selection of parameters, can be set by the UP/DOWN key to support the short press, long press (fast increase or decrease); To set other parameters, repeat step b, c); d) After all parameters are set, long press set key to exit and save; The Key Function Description: In the Run interface (main interface): Short press SET button to display the current set of parameters; Short press UP button, toggle display charge percentage and charging time; Short Press DOWN button, select Turn on/off relay enabling, if the relay can be closed, will show ‘ off ‘ as a reminder; Long press UP button, switch low power state on:No operation in 10 minutes turn off backlight OFF: Backlight is always bright Long press SET button,enter the parameter settings. Calculation of voltage percentage: voltage percentage = battery voltage/(volt-HI – volt-LI) Additional Features a) Charging time recording function: not open charging time control, the product will record a full time, when the entry time display interface, flashing display charging time, and then exit time display interface or next charge to open (relay conduction) when empty; b) Automatic parameter detection: When the parameters are set, exit, if volt-LI dn≥ volt-HI UP, the system will flash display “ERR” as a reminder; c) Battery Access detection: This product attached to the battery, if not connected to the battery, the system will be shown in the downlink “NbE” as a reminder Analysis of common failures Q: How much is suitable for V level use? How much v voltage does this module fit? A: This section is suitable for the minimum 6V, the highest 60V voltage range, the maximum expenditure level 48V, because 48V battery full of electricity in 60V, and then a high fever, if your battery is higher than 48V, please select other section. Q: The power of the subsequent electrical appliances snapped! LED flashing? A: This is because your charging current is too large or the battery capacity is too small to cause a power to immediately reach the voltage limit, relay disconnect, disconnect, the voltage and quickly down to the lower voltage, and began to recharge, cycle, at this time you want to reduce the charging current only line, Usually the charging current is the battery capacity of the very 1 to 1.5, such as 20AH battery charging current generally around 2-3a! Note that a large current charge will cause the battery fever accelerated aging, drum kits and even explosions! Q: What control mode? Can I cycle the charge automatically? Can I use the side charge? Can I limit the flow? A: This is voltage control, For example, set the voltage limit of 12.0V, voltage up to 14.5V, voltage charge to 14.5V this value on the power off, voltage down to the 12.0V relay closed and start charging, can be filled with side, voltage control mode only to turn off and open, can not limit the flow, charging current completely depends on your charger! Q: Input 12V can or not charge 24V battery, or enter 48V can give 12V battery charge? A:This is a simple voltage controller, only play the role of switch, can not swing to the battery charge, so you want to give what battery charge to be ready what kind of charger! It’s necessary! Package Included: 1 x XY-L30A DC 6-60v 30A Lithium Battery Charging Control Module LCD Display Protection Board Charger Time Switch Instructions are NOT included. We don’t provide technical assistance please make sure that you are familiar with the product before purchasing.
60%
XY-L30A DC 6-60v 30A Lithium Battery Charging Control Module LCD Display Charger
$8.21 Original price was: $8.21.$4.92Current price is: $4.92.
Category:
Meta:
Modified Item : No
Maximum Continuous Output Current : 30A
Custom Bundle : No
Country/Region of Manufacture : China
Nominal Current Rating : 30 A
UPC : Does not apply
MPN : Does Not Apply
Brand : Unbranded
Type : Electronic Voltage Regulator
Model : XY-L30A
Output Voltage Range : 6-60v
Product Type : Power Regulator
gtin13 : Does not apply
Current Conversion : DC to DC
Output Voltage Rating (DC) : 60 V
Input Voltage Range : 6-60v
Conversion Direction : Step-Down
Installation Area : Indoor
Device Function : Voltage Converter
Inrush Current Rating : 30 A
Maximum Continuous Output Current : 30A
Custom Bundle : No
Country/Region of Manufacture : China
Nominal Current Rating : 30 A
UPC : Does not apply
MPN : Does Not Apply
Brand : Unbranded
Type : Electronic Voltage Regulator
Model : XY-L30A
Output Voltage Range : 6-60v
Product Type : Power Regulator
gtin13 : Does not apply
Current Conversion : DC to DC
Output Voltage Rating (DC) : 60 V
Input Voltage Range : 6-60v
Conversion Direction : Step-Down
Installation Area : Indoor
Device Function : Voltage Converter
Inrush Current Rating : 30 A
Related products
-
Fast Charging Charging Stand Charging Station
$17.55Original price was: $17.55.$10.53Current price is: $10.53. -
Fast Charging Practical Charging Station Charging Stand
$32.46Original price was: $32.46.$19.47Current price is: $19.47. -
Fast Charging Charging Station Charging Stand Charger
$22.34Original price was: $22.34.$13.40Current price is: $13.40. -
Multifunctional Fast Charging Charging Stand Charging Station
$21.99Original price was: $21.99.$13.19Current price is: $13.19. -
Multifunctional Fast Charging Charging Stand Charging Station
$21.64Original price was: $21.64.$12.98Current price is: $12.98. -
Fast Charging Premium Charging Stand Charging Station
$16.71Original price was: $16.71.$10.02Current price is: $10.02. -
Multifunctional Fast Charging Charging Station Charging Stand
$16.67Original price was: $16.67.$10.00Current price is: $10.00. -
Fast Charging Charger Dock Charging Station Charging Stand
$16.71Original price was: $16.71.$10.02Current price is: $10.02. -
Premium Fast Charging Charging Station Charger Charging Stand
$15.45Original price was: $15.45.$9.27Current price is: $9.27. -
Fast Charging Premium Practical Charging Station Charging Stand
$16.50Original price was: $16.50.$9.90Current price is: $9.90. -
Fast Charging Premium Charging Stand Charging Station Charger
$16.53Original price was: $16.53.$9.92Current price is: $9.92. -
Charge And Go Mini Charging Station Phone Charging Station
$17.55Original price was: $17.55.$10.53Current price is: $10.53. -
Charge And Go Mini Charging Station Phone Charging Station
$21.99Original price was: $21.99.$13.19Current price is: $13.19. -
Portable Charging More Convenient for Riding Usb Charging Fast Charging
$7.77Original price was: $7.77.$4.66Current price is: $4.66. -
Portable Charging More Convenient for Riding Usb Charging Fast Charging
$7.92Original price was: $7.92.$4.75Current price is: $4.75. -
Portable Charging More Convenient for Riding Usb Charging Fast Charging
$7.53Original price was: $7.53.$4.51Current price is: $4.51. -
SMARTGEAR Charging Stand 15 Watt Quick Charge Charging Stand
$8.79Original price was: $8.79.$5.27Current price is: $5.27. -
Charging Stand for Upgraded Battery Cells Charging Stand Charging Stand
$10.07Original price was: $10.07.$6.04Current price is: $6.04. -
Wireless Charging Station 3 in 1 Charging Station Charging Stand
$17.60Original price was: $17.60.$10.56Current price is: $10.56. -
Wireless Charging Station 3 in 1 Charging Station Charging Stand
$17.60Original price was: $17.60.$10.56Current price is: $10.56.