Manfrotto 405 adapter 4 Kirk Benro Markins Arca Swiss Wimberley Acratech rrs

Part Number # M405F63 Product Description: New Hejnar Photo Manfrotto 405 a conversion set. This combination of plate and clamp (model F63) will let you use Manfrotto geared head with any arca swiss equipment. Manfrotto gear head is more precise than ball head and preferred by many photographers. Many architectural and interior photographers prefer geared 3-axis tripod heads rather than ball heads because they can make precision adjustments to each axis. Two popular heads are Manfrotto 405 and 410 which each use Manfrotto QR plate. Arca-swiss plate fans can now bypass this. Clamp can be disconnected from plate and use independent on other equipment if needed. If you prefer, a clamp can be positioned in relation to the adapter plate in 90-degree increments to make it convenient for everybody, or what are you used to. It is the best quick release system for tripods and monopods. International standard dove-tail clamp, compatible with Arca-Swiss type quick release plates An adapter plate is attached to Manfrotto geared head in two simple steps. 1) removing lock down level with provided 3mm hex key. 2) Connect plate to geared head using one 1/4-20 screw and one 10-32 screw. Compatible with: Markins Really Right Stuff Arca Swiss Wimberley Kirk Photo Clam Foba Vanguard ABH Series Ball Heads (ABH is Vangaurds only Arca-Compatible series) Custom Brackets Jobu Designs Acratech Other Arca swiss type products Clamp Specification: 3.25 inch long Socket is countersunk on top for 1/4-20 screw but also threaded 3⁄8”-16. Two set of outside holes are taped 1/4-20 and 45mm or 30 mm apart from each other. The clamp includes two safety stop relief grooves. This prevents free fall when the clamp is not fully closed, and your plate has safety stops Clamp knob is captive. Knob stops at maximum opening — cannot be lost in the field. Clamp knob is made from one piece. No spacers or bushing between knob and clamp itself. No room for dust, sand etc to enter inside. Made from 6061-T6 Aluminum. Black hard coat anodized clamp and clear anodized knob. Made in USA Plate Specification: 3.56 inch long 2.56 wide. 5/8 thick. One hole taped 1/4-20 Eight holes taped 10-32 and placed aroud 1/4 hole in 90 degree increament. Hole to hole mounting hole distance between 10-32 holes is 30mm or 45mm Made from 6061-T6 Aluminum. Made in USA Auction Includes: One 3.25 inch clamp ( Model F63) One Adapter Plate Hex key for ¼-20 screw 10-32 screw and original level screw Three 10-32 screws Two 1/4-20 x 3/4 screws. Shipping Information: Free Shipping with USPS First Class Mail. Tracking information provided. USA Costumers please note that USPS packages may travel much longer than the estimated delivery time and tracking information is not always updated daily. If your order is time sensitive, you need daily tracking update please use FedEx, UPS or Express Mail as delivery service during checkout.