Glass Cutter – Glass Cutting Tool with Glass Cutting Oil for Glass Tiles Mosaics

The Amazing Glass Cutter VIDEO BELOW Free Sample Glass Cutting Oil To Get You Started Yes this is the “Real One” Invented in UK in 1971 Still Made in Scotland – Great Britain Cutting Glass – The Amazing Glass Cutter Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] This Kit Comes with 1 Amazing Glass Cutter 1 x Bottle Glass Cutting Oil 1 Multi Page Instruction Booklet Multiple Video Links Lifetime Warranty Go Straight to Our Ebay Store Using the eBay App? Copy and Paste link into a browser window: https://player.vimeo.com/video/ 135609556 Video Links W ill Open in Another Window As Per Ebay Policy Glass Cutter – Not just any Glass Cutting Tool This is The Amazing Glass Cutter made in UK a manual Glass Cutter that lets you cut straight, radius and wavy lines in glass, mirror, stained glass and glass tiles. The Glass cutting wheel is not sharp, in fact it is probably the dullest tool you will own but the hardest, the hardness of the cutter blade along with the special angle ground into the scoring wheel allows The Amazing Glass Cutter to cut thick and thin glass materials and even Hard Tile without hurting the wheel. The Secret to using The Amazing Glass Cutter is to follow the instructions carefully. Practice on a spare piece to work out the correct pressure, usually not enough pressure is applied to start but it can cut be better with less pressure also sometimes especially on glass. Cutting on the floor instead of on a solid board at waist height will give uneven pressure being applied along the score line and may even crack the glass. Not oiling the scoring wheel and making sure it is turning very freely first can cause the wheel to bind, drag and even lock up and just scratch the glass instead of evenly scoring it and this will prevent the glass cutter from working correctly. Holding the Glass Cutter by the plastic grips when scoring with your strongest hand means that you are only applying minimal amount of pressure if any on the cutting wheel at the point where the scoring is happening. Always Pull towards you not Away. For Stained Glass, Plate Glass, Picture Framing Glass or Fused Glass the cutting wheel should be oiled every single score, oil will run down onto the glass and will not only cool down the glass and give a cleaner cut it will also extend the life of the cutting wheel. If you can wipe the oil off the glass and there is no score line visible, then you need to increase the pressure – make sure you are holding close to the wheel and use the 2 handed method if needed especially if you do not have a lot of strength in your hands or are cutting a very hard material. Secret for cutting thin strips of glass: The gap between the aluminum breaker and the bottom side of the jaws that holds the cutting wheel can be made smaller simply by folding the breaker forward and twisting / pivoting it forward on the rivet, this can be stiff to start with when the tool is new, and it can be glued in this position if you only cut thin glass all the time. Glass sheets for crafts can be Cut From 1/16″ To 3/8″ Thick and upto 8ft long can be cut and even thicker Glass Can Be Cut Using Techniques Included In The Detailed Instructions. Available in Red Black and Pink and also left handed – See somebody cares.