Front Splitter, 2 Side Splitters, winglets, support rods for 20-24 C8 Corvettes

Customize your 2020-2024 Corvette C8 with these SBS Performance Parts’ solid 1/4″ automotive ABS. All the SBS Performance Parts’ splitters are made from solid 1/4″ ABS front splitter that mounts under your C8s front bumper and 2 under the side rockers. The grainy side is to be mounted up, however, some prefer the smooth side up- requires professional painting. Front splitter will fit if you have no splitter or will fit if you have an aftermarket splitter. Protects the bottom of your bumper/splitter and adds track tested aero -shipped separately. SBS Perf ormance Parts has been making front and side splitters for American performance cars that look great for some personalization or actual track time for 7 years. Contains: 1- SBS front splitter 2- winglets 10- rubber spacers 16- 1/4″-20 fender washers 16- #8 flat phillip screws 10- #6 flat phillip screws 2-Longacre Racing Support rods (shipped seperately) ($95.00 cost) 2- SBS side splitters 2-large winglets 16- 1/4″-20 x 3/4″ machine screws 16 – 1/4″-20 U nuts (extruded U clips) 12- rivets 16- #6 flat phillip screws Includes mounting hardware and instructions. Also includes two ($48.00 each) Longacre Racing 6″ black support rods (shipped separately from the distributor). Attaches with 3 tape, screws, u clips and rivets. Automotive ABS is quite sturdy. ABS can literally take hundreds of blows of a sledgehammer without cracking. Track and high speed tested. ABS is black: grainy semi-gloss finish on one side and smooth on the other. We highly recommend that you paint the smooth side if that is the side you choose to have as the top side. This listing contains 1 SBS Performance Parts’ front splitter and 2 SBS Performance Parts’ side splitters which are screwed and riveted to the bottom of your rocker panels. The splitter Utilizes 3 stock bolt points on each side. The other bolt points require drilling 1/4″ drill bit and 1/8″ drill bit for the rivets. compatible with coupe and convertible and XL rock guard/mud gaurds. Best to have professionally installed. Support rods, front splitter and side splitters are made and shipped separately! Needed: 7mm socket, phillips screw driver or phillips bit, drill or cordless screw gun, 1/8′ drill bit, 1/4″ drill bit, rivet gun, thread lock/ locktite, and super glue. Condition is “New”. Shipped free with UPS ground, FedEx Ground or FedEx Home delivery to lower 48 States. Please note that black ABS is a solid plastic that is the actual product color. This product is designed to have the grainy, textured side facing up or out. The bottom, smooth side may have some sheen but it is not a finished product and it can scratch easily. The smooth side can be installed facing up or out, only if it is painted or you have a wrap overlaid on it. NOTICE: due to supply chain shortages of resins and increased petroleum costs (both used in making of plastics), the raw ABS material prices are increasing by $40 per unit as of February 28, 2022. We will be forced to raise our prices by $40 on March 1, 2022.