Fluke 726 Precision Multifunction Process Calibrator

ebay template The Following Items Are Included: Fluke 726 Precision Multifunction Process Calibrator (BC# 40138-L/T*) (2) 1000V Hard Point Test Leads User Manual On CD-ROM Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Fluke 726 Precision Multifunction Process Calibrator Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters Integrated pressure switch test allows you to capture the set, reset and deadband of a switch Power transmitters during test using 24 V loop supply and simultaneous mA measurement Includes Carrying Case & Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 1 YEAR WARRANTY Fluke 726 Precision Multifunction Process Calibrator More Calibration Power! The Fluke 726 Precision Multifunction Process Calibrator is designed specifically for the Process industry with broad workload coverage, calibration power and unsurpassed accuracy in mind. The 726 measures and sources almost all process parameters and can calibrate almost anything. The 726 will also interpret results without the help of a calculator and store measurement data for later analysis. Features: More precise measurement and calibration source performance, accuracies of 0.01%. Two separate channels; measure, source and view process signals simultaneously Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters Measure or source pressure* using any of 29 Fluke 700Pxx Pressure Modules Source mA with simultaneous pressure measurement to conduct valve and I/P tests Integrated pressure switch test allows you to capture the set, reset and deadband of a switch Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis Transmitter error% calculation, interpret calibration results without a calculator Perform fast linearity tests with auto step and auto ramp features Power transmitters during test using 24 V loop supply and simultaneous mA measurement Store frequently-used test setups for later use Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement. New voltage input protection design for improved reliability Measurement Accuracy Voltage DC 30.000 V 0.01%+ 2 mV (upper display) 20.000 V 0.01%+ 2 mV (lower display) 90.00 mV 0.01%+ 10μV -10.00 mV to 75.00 mV 0.025 % + 1 count (via TC connector) Current DC 24.000 mA 0.01%+ 2 mA Resistance 0.0 to 4000.0 Ω +/- 0.015% Frequency 2.0 to 1000.0 CPM 0.05 % + 0.1 cpm 1.0 to 1000.0 Hz 0.05 % + 0.1 Hz 1.00 to 15.00 kHz 0.05 % + 0.01 kHz Sensitivity 1 V peak-to-peak-minimum Pressure Accuracy from 0.025% of range using any of 29 pressure modules. (for detailed specifications refer to pressure modules in options and accessories) Modules available for differential, gauge, vacuum, absolute, dual and high pressure. Source Accuracy Voltage DC 100.00 mV 0.01%+10 μV 20.000 V 0.01%+2 mV -10.00 mV to 75.00 mV 0.025 % + 1 count (via TC connector) Current DC 24.000 mA (Source) 0.01%+ 2 μA 24.000 mA (Simulate) 0.01%+ 2 μA Resistance Range, Accuracy (Percent of reading + floor) and Excitation Current 5 to 400 Ω, 0.015% + 0.1 Ω, 0.1 to 0.5mA 5 to 400 Ω, 0.015% + 0.05 Ω, 0.5 to 3mA 400 to 1500 Ω, 0.015% + 0.5 Ω, 0.05 to 0.8 mA 1500 to 4000 Ω, 0.015% + 0.5 Ω, 0.05 to 0.4 mA Frequency 2.0 to 1000.0 CPM 0.05% 1.0 to 1000.0 Hz 0.05% 1.0 to 10.0 kHz 0.25% 10.0 to 15.0 kHz 0.5% Waveform: 5 V p-p squarewave, -0.1 V offset RTDs and Thermocouples Measure and Source Accuracy: Cu10 1.8 °C NI-120 0.15 °C PT-100 (385) 0.45 °C PT-100 (392) 0.35 °C PT-100 (391-JIS) 0.35 °C PT-200 (385) 0.95 °C PT-500 (385) 0.55 °C PT-1000 (385) 0.35 °C RTD Resolution: 0.01 C (0.01 F) Cu10.01 C 0.1 C (0.1 F) J: 0.4 °C K: 0.5 °C T: 0.4 °C E: 0.4 °C R: 1.4 °C S: 1.4 °C B: 1.4 °C L: 0.45 °C U: 0.45 °C N: 0.6 °C XK: 0.4 °C BP: 1.1 °C TC Resolution J, K, T, E, L, N, U: 0.1 °C, 0.1 °F B, R, S: 1 °C, 1 °F Specifications Ramp Functions Source functions: Voltage, current, resistance, frequency, temperature Ramps Slow ramp, Fast ramp, 25% step-ramp Loop Power Function Voltage: 24 V Accuracy: 10% Maximum current: 22 mA, short circuit protected Step Functions Source functions: Voltage, current, resistance, frequency, temperature Steps 25% of range, 100% of range Environmental Specifications Operating Temperature -10 °C to +55 °C Storage Temperature -20 °C to +71 °C Operating Altitude 3000 m Safety Specifications Agency Approvals EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 Mechanical & General Specifications Size 200mm x 96mm x 47mm (7.9 in x 3.8 in x 1.9 in) Weight 650 g (23 oz.) Batteries 4 AA alkaline batteries Battery Replacement Separate battery compartment, accessible without breaking calibration seall Side port connections Pressure module connector, also used for remote real-time programming For full Fluke 726 product specifications, please click here: Fluke 726 Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR’s, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store . All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don’t hesitate to contact us for a Quote on Something you don’t see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don’t have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we’ll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click “Get Rate”. Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost’s and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou. Inventory and Ecommerce Management