Кронштейн для крепления оптического прицела Dovetail для телескопа США

A# Feature: Suitable for finder Scope, red-dot, pointers and guidscope. Universal size 1/4inch fit for different astronomical telescopes. Specifications: Material: Aluminum alloy Color: Red/ Black/ Silver Width: Approx.34mm/1.33inches Size: Approx.43x42mm/1.69×1.65inches Package includes: 1 x Finder Scope base (with Screw) B# Feature: Finder scope guide rail/ small size dovetail plate Used as finder scope base or guide scope base Specifications: Color: Red/Black Size: 45mmx31mm Package Includes: 1 Piece 45mm Telescope Dovetail Plate with 1*M4 threaded holes, 1*M6 threaded hole and 1*Φ7MM through holes C# Feature: The finder scope Base with flat bottom, suitable for installing finder scope clamps, for dovetail plate connecting different finder scope for ZWO boxes, and other astronomical telescope accessories on the dovetail plate. It cannot be used on curved object surfaces! Specifications: Stand Bottom Finderscope Base Material: Aluminum alloy Weight: approximately 40g Screw hole: screw hole 1/4, M4 through-hole Package Included 1/2x dovetail groove (with Screw) D# Feature: Finder scope guide rail/ small size dovetail plate Used as finder scope base or guide scope base Specifications: Color: Red/Black Size: 90mmx31mm Package Includes: 1 Piece Telescope Dovetail Plate E# Feature: 2x 1/4 screw holes in the middle, 1x M62 stepped screw hole on both sides; The length is 108mm/4.25in, the widest part of the lower edge is 43.4mm/1.7in, and the inner width of the front groove is 15.6mm/0.61in Specifications: Material: Aluminum Alloy Size Chart:107mmx15.5mmx43.5mm/4.2inchx0.61inchx1.7inch Package Includes: 1 Dovetail Mounting Plate 2 Screws F# Feature: It can be installed for CelestronC5, C6, 6SE, C8, 8SE, 150SLT, binoculars, and another primary mirror, can be fitted to the sharpstar, Celestron, SKYWATCHER another model mounting screws: M3-M4 screw Package Include: 1 Universal Dovetail Base for Finder Scope（with4 screws as picture） G# Feature: The finder scope Base with flat bottom, suitable for installing finder scope clamps, for dovetail plate connecting different finder scope for ZWO boxes, and other astronomical telescope accessories on the dovetail plate. It cannot be used on curved object surfaces! Specifications: Flat Bottom Finderscope Base Material: Aluminum alloy Weight: approximately 40g Surface: oxidized surface Screw hole: screw hole 1/4, M4 through-hole Package Include: 1 Flat Dovetail Base for Finder Scope Note: Please allow slightly errors due to manual measurement and different monitors. On May 6, 2024 at 06:24:37 PDT, seller added the following information: