60%

DSK-1 Brush Control Switch, DSK-1 Master Command Controller, DSK 1 Brush Switch

Share On:

Original price was: $118.24.Current price is: $70.94.

Category:
Meta:
Modèle : None
Marque : None
classification : Straight type
MPN : DSK-1
Marca : None
Type : Accessories
Brand : Unbranded/Generic

parameter – – Introduction: DSK-1 brush control switch can be used as main command controller for battery forklift trucks, commonly used in railway stations, bus stations, ships, etc. It is mostly used for loading and unloading operations in railway stations. DSK-1 Brush Switch Instructions for Use DSK-1 brush type control switch is specially matched with KP2-150 series control boards for regulating the speed of battery, forklift and truck. The control switch, reasonably designed, adopts the brush structure, and is equipped with self-locking device, so it has the characteristics of safe and reliable contact, compact appearance, easy installation, and the service life is much longer than that of similar products in China, which is the more ideal (foot) small control switch at home and abroad. I. Structure: DSK-1 brush type control shape is assembled by the base plate, pedal, transmission frame, brush, rotor, clockwork, etc. When the foot presses the pedal, the transmission frame drives the rotor, so that the copper piece contacts with the brush, thus the self-locking of the control plate and the 1, 2, 3, 4 gears are controlled, and when it is relaxed, it resets itself automatically by relying on the knob force of the clockwork. Technical data: (1) Rated voltage, not more than 48VDC. (2) Operating frequency, 600 times / hour. The duration of energisation is 40%. Third, the use of the environment: (1) altitude, not more than 2500 metres. (2) Ambient temperature, not more than 40 degrees Celsius, not less than -25 degrees Celsius. (3) Relative temperature, not greater than 85%, (temperature 20 degrees Celsius plus or minus 5 degrees Celsius) (4) Amplitude is not greater than 0.5mm, the frequency is not greater than 600 vibrations per minute. (5) With rain protection and not filled with vapour in the environment. (6) in a medium without the risk of explosion, and the medium is not enough to corrode the metal to destroy the insulation of the gas and conductive dust in the place. IV: Maintenance: (1) The brushes of the control switch are worn out due to rotation, so the cover should be disassembled for cleaning after every 500 hours of use. (2) When the brush due to wear and tear, the length is less than 8mm, or the pressure is too small to affect the contact, should be replaced. Packing:1PC Warranty period: 120 days On Aug 29, 2023 at 20:00:32 PDT, seller added the following information:

Related products