DJI Osmo Pocket 1 + Polar Pro Grip System + Osmo Expansion Kit + Soft Case

DJI Osmo Pocket 1 + Polar Pro Grip System + Osmo Expansion Kit + Soft Case Osmo Expansion Kit The DJI Osmo Pocket Expansion Kit provides a few add-on accessories that will let you do a lot more with your Osmo Pocket Gimbal. The Controller Wheel attaches right below the LCD of the gimbal, facing the user, and provides a dial for precise pan and tilt control. The dial is comfortably accessible by thumb. A selector switch next to the dial allows you to choose whether the dial should control pan or tilt motion. There’s also a button for changing shooting modes and another button for re-centering the gimbal. The Wireless Module allows for remote control of the gimbal from your mobile device. It does this by providing a wireless connection between the two over Bluetooth and Wi-Fi while serving as a base. It can also be used just as a base. And it offers a USB-C connector for charging the gimbal. The Accessory Mount provides a 2-prong mount for attaching 3-prong accessories on the front of the gimbal. It clasps on around the center of the gimbal. A 32GB microSD card is also included in the kit. Controller Wheel Provides a pan and tilt thumb dial, mode select button, and gimbal re-center button. Wireless Module Allows for remote control of the gimbal from your mobile device by providing a wireless connection between the two. It can also be used simply as a base, and it offers a USB-C connector for charging the gimbal. Accessory Mount Provides a 2-prong mount for attaching 3-prong accessories on the front of the gimbal. It clasps on around the center of the gimbal. PolarPro PCKT-GRIP Overview The PolarPro Grip System for DJI Osmo Pocket is designed to provide a secure grip that attaches to your Osmo Pocket and allows you to mount a smartphone to use as a viewfinder for your camera. The ergonomic design is crafted using reinforced nylon and doesn’t interfere with the operation of your Osmo. The spring-loaded, adjustable phone mount locks your mobile display monitor within the grip, minimizing the chance of your phone disconnecting from the connector. The Grip System features three 1/4″-20 threaded mounting holes, allowing you to mount the system on a tripod or attach accessories, such as lights, to the grip. The Grip System enables you to mount a monitor on your Osmo and operate the system using only one hand. Key Features For Smartphones up to 3.05″ Wide Ergonomic Grip Design Secures your Phone to DJI Osmo Pocket 3 x 1/4″-20 Threaded Mounting Holes Mounts on Tripods Enables Attaching Accessories to Phone Specs General Dimensions 121.9×36.9×28.6 mm Weight 116 g Battery Type LiPo Capacity 875 mAh Energy 6.738 Wh Voltage 7.7 V Operating Temperature 0°-40° C (32°-104° F) Operating Time 140 mins (When shooting 1080p/30 fps video) Charging Time 73 mins (When using a 10W charger) Gimbal Controllable Range Pan: -230° to +50° Tilt: -95° to 50° Roll: ±45° Max Controllable Speed 120°/s Angular Vibration Range ±0.02° Camera Sensor 1/2.3” CMOS Effective pixels: 12M Lens FOV:80° F2.0 Format Equivalent: 26mm ISO Range Photo:100-3200 Video:100-3200 Electronic Shutter Speed 8s-1/8000s Max Image Size 4000×3000 pixels Still Photography Modes Single Shot; Panorama; Timelapse; Motionlapse; Hyperlapse Video Resolution 4K Ultra HD: 3840×2160 24/25/30/48/50/60fps 2.7K: 2720×1530 24/25/30/48/50/60 fps FHD: 1920×1080 24/25/30/48/50/60/120fps Video Recording Modes Auto ; Slow Motion Max Video Bitrate 100 Mbps Supported File Formats FAT32 (≤32 GB) exFAT (≥64 GB) Photo Formats JPEG / JPEG+DNG Video Formats MP4 / MOV (MPEG-4 AVC / H.264) Supported SD Cards MicroSDMax. Capacity: 256 GB Audio Output 48 KHzAAC