Brewing Controller, 240V, 2 (dual) x 5500W (Brewing / Distillation)

Designed and built in Wisconsin, USA. 220/240Vac Dual 5500W (11000W combined) controller model GC-M9E made by Electric Badger Company. REQUIRES a 4 prong 50A range outlet on a 50A circuit breaker. Can be used to control boil intensity or temperature in an electric kettle, mash tun or HLT (2 vessels at the same time) or STILL or any other process where temperature control is desired. With the flip of a toggle switch, the two heating element circuits (11000W total maximum power) can be controlled by the first Temperature controller as one. Includes everything shown in the pictures. Just plug it in and play. This controller makes home brewing or distilling safer, easier and less expensive than using propane. No open flames, no tank exchanges. All you need for power is a 240V range outlet. Depending on where you live it costs ~$0.75 in electricity to brew a 10 gallon batch of beer with this controller. What’s included: *Master ON/OFF power switch *2 ON/OFF Temperature controllers (one for each heating circuit) *2x 1/2″ NPT (2″ or 4″ long; LET ME KNOW AT THE TIME OF PURCHASE, OTHERWISE YOU’LL GET ONE OF EACH LENGTH) stainless steel Temperature probes included *2 Power regulation potentiometers (1 per element) *2 Pump (or other 4A max. accessory) control switches ON/OFF, 4A fuse protected *Volt/Amp meter *2x 5ft temperature probe cable (disconnects from the controller) *1x 5ft or 6ft, 4 prong 50A range cord (does not disconnect from the controller) *2x 4ft, 12awg heating element cords terminated with a L6-30R twist lock connector (does not disconnect from the controller) Compatible with Blichmann 240V BoilCoil. *Pdf user manual emailed after purchase. Functions the controller can perform: Each temperature controller can operate in either Boil control or Temperature control mode by switching the mode switch. -displays temperature in either Celcius or Fahrenheit -control boil intensity in an electric kettle (heat element(s)). -control stand alone MASH temperature. -Control stand alone HERMs setup (with the correct setup) -control a BIAB mash and boil functions. -control HLT tank/kettle temperature. -control 2 pumps Specs: Temperature probe contains a NTC 10k B=3950 thermistor accurate to +/-1F in the mash temperature range. Digital ON/OFF temperature controller with 0.5F hysteresis controls process temperature with accuracy of +1.5F / -0.5F of setpoint. Full range 0 to 100% power control. 11000 Watt maximum power rating. 2 x 40Amp rated Solid state relays used for power control. Personal note: I started out by building electric brewing controllers for my brewing buddies over 7 years ago. I focus on quality and customer service. I stand behind my product, that’s why every controller comes with a 5 year warranty. Should you experience any problems with the controller due to any defects or failure, I will make things right by either repairing or replacing the controller. ================================================================================================= ! I ship ONLY within the Continental U.S.A ! ================================================================================================ **Satisfaction Guarantee** If you are not satisfied with this controller for any reason, return it for a full refund within 60 day