Acoustic Studio Absorption Foam Panel 24 Pack 2'' X 12'' X 12'' Broadband Sou…

More effective noise reduction experience: Made of high-density flame-retardant material, it can more effectively isolate sound and create a good recording environment. For decorative or professional use: This foam is ideal for live studios, practice rooms or home entertainment centers. The high-quality panel absorbs sound better and reduces fluctuations, reverberation, and flutter echoes in small to medium-sized rooms. For decorative purposes, wedge, egg, and pyramid shapes can also be placed side by side with acoustic bass traps, corner bass traps, and other bass acoustic foams. Size description: After unpacking, each panel is 2 inches thick (block size) (2 inches x 12 inches x 12 inches)-The highest point is 2 inches. Its lowest point reaches a height of 1/2 inch. Overall noise reduction coefficient (NRC): 0.55. Foam can help absorb and give audio the ability to flow freely. Note: our goal is to accurately cut each tile / wedge to 12 inches, but-CNC machine tolerances-can measure final cuts from 11 inches 7/8 (bottom) to 12 inches 1/8 (top) . : If you have any questions, please us freely! Package Includes: Acoustic Foam Panels (COMPRESSED) Dimensions: 2” x 12” x 12” Reduction Of Noise – Innovative Periodic Groove Structure for Much Better Broadband Absorption Ability / High NRC: 0.75, controlling and reducing early reflections, flutter echo, slap echo, excessive reverb and comb filtering that result from sound bouncing off walls and ceilings. Environmental And Safety – The raw material is made of high-quality environmentally friendly polyurethane foam, no irritating elements, flame-retardant properties no hazards and safe to use. Wide Application – Suitable for studio, control room, concert hall, podcast, etc.also can be used for church, home theater, professional theater, office, etc. Installation Suggestions – It is recommended to stick tape to the four corners and the center of the back of the acoustic foam panels, and then stick it to the wall. Or use Spray Adhesive or liquid glue to stick it on the wall.They only need to be taken care occasionally through dust vacuuming. How To Recover The Normal Size Of The Acoustic Foam – (1) Open the storage bag and set sound-dampening foam in the open air for 24-72 hours to make it extend itself.Method 2: 1. immerge the sound-absorbing foam into water for 1 minute. 2. Gently wring it out , and then use a hair dryer to dry (optional) Tipps: Hair dryer can rebound the foam quicker and cleaner.