60%

Access Panel / Wall Access Hatch / Hidden Hatch For Tiles ATP 40×50

Share On:

Original price was: $176.55.Current price is: $105.93.

Category:
Meta:
Frame Material : Metal
Type : Inspection Door
Item Width : Less Than 50 cm
Item Height : 50-100 cm
Brand : Praktika
Item Weight : More Than 2 kg
Suitable For : Walls
Item Depth : 4-5 cm
Material : Metal, Aluminum

Aluminum hatches with a depth of 45 (series “ATP”) and 55 mm (series “ETP”) depending on the size. They have a profiled silicone seal around the perimeter of the frame, which provides reliable dust and moisture protection of the space behind the hatch. The door position can be adjusted in three directions: horizontally, vertically and tilted. Equipped with a powerful magnetic push lock, which ensures stable opening of the hatch without jamming, even if the door is lined with very heavy material. Advantages of the design: Made of aluminum profile. The hatch is opened by pressing the hatch door on the hinge side. The position of the door is adjusted in three directions: horizontal, vertical and angle of inclination. The door can be opened 180 degrees by means of a two-link hinge, which allows the hatch door to be opened frontally. The hatch has a profiled silicone seal around the frame, which provides reliable dust and moisture protection of the space behind the hatch. Technical advice: The hatch is mounted in a pre-prepared aperture of a metal frame or other material. Along the contour of the hatch frame, 12.5 mm deep grooves are arranged on the front side of the hatch for fixing the plasterboard wall to the hatch frame. At least 60% of the tile area should be glued to the hatch door. On the side of the hinge, adhesive tiles on the door can protrude from 5 to 50 mm, and on the other sides from 5 to 75 mm. Characteristics of a hidden hatch for ATP 40×50: Hatch location and type: Wall-mounted, hinged Hatch trim options: Ceramic tiles, mosaics, artificial and natural stone and other finishing materials Opening method: By pressing, with the CombiTOUCH® magnetic push lock Hatch opening angle: 180° Hatch frame size Width x height x depth: 400 mm х 500 mm х 45 mm Size of the open hatch opening Width x height: 337 mm х 437 mm Door size Width x Height: 350 mm х 450 mm Maximum door load: 10 kg Adjusting the door position: Vertically, horizontally, according to the angle of the door. Hatch material: Aluminum alloy, plasterboard (Knauf) Total hatch weight: 4.6 kg Equipment: Installation instructions, 2.5 and 5 mm L-shaped hex keys, vacuum suction cup

Related products