(2) AMPHENOL CONNECTOR PT06E20-16PSR 5935-00-857-6691

ITEM NAME: CONNECTOR,PLUG,ELEC DEFINITION: AN ELECTRICAL FITTING WITH ELECTRICAL CONTACTS, CONSTRUCTED TO BE AFFIXED TO THE END OF A CABLE, CONDUIT, COAXIAL LINE, CORD OR WIRING FOR CONVENIENCE IN JOINING WITH OTHER ELECTRICAL CONNECTOR(S) OR PRINTED WIRING BOARD AND IS NOT DESIGNED TO BE MOUNTED ON A BULKHEAD, CHASSES, PANEL, PRINTED WIRING BOARD, OR THE LIKE. EXCLUDES:JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (AS MODIFIED); AND SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. SEE ALSO LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (AS MODIFIED); AND CABLE ASSEMBLY (AS MODIFIED). FOR ITEMS WITHOUT INSERTS, SEE SHELL, ELECTRICAL CONNECTOR. CHARACTERISTIC VALUE THREAD CLASS 2A THREAD DIRECTION RIGHT-HAND BODY STYLE STRAIGHT SHAPE, INTERNAL COUPLING OVERALL LENGTH 1.420 INCHES MAXIMUM OVERALL DIAMETER 1.531 INCHES MAXIMUM ENVIRONMENTAL PROTECTION MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF THREADED DEVICE TYPE BACK SHELL MATING END QUANTITY 1 CONTACT POSITION 20-16 SINGLE MATING END ARRANGEMENT STYLE CONTACT REMOVABILITY REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING CONTACT MAXIMUM AC VOLTAGE 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING RATING IN VOLTS POLARIZATION METHOD KEYWAY OR MULTIPLE KEYWAY INSERT POSITION IN DEG 0.0 SHELL TYPE SOLID CONNECTOR LOCKING METHOD BAYONET LATCH NOMINAL THREAD LENGTH 0.290 INCHES THREAD QUANTITY PER INCH 18 NOMINAL THREAD SIZE 1.188 INCHES TERMINAL LOCATION BACK SINGLE MATING END SINGLE CONTACT GROUPING CONTACT SURFACE TREATMENT GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING CONTACT SURFACE TREATMENT MIL-G-45204,TYPE 1,CLASS 1,GRADE C MIL SPEC 1ST DOCUMENT AND CLASSIFICATION TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND QQ-N-290,GRADE E FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING TERMINAL TYPE CRIMP SINGLE MATING END SINGLE CONTACT GROUPING SHELL MATERIAL ALUMINUM ALLOY 6061 SHELL SURFACE TREATMENT CADMIUM SHELL SURFACE TREATMENT QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE DOCUMENT AND CLASSIFICATION SHELL MATERIAL DOCUMENT AND QQ-A-367,COMP 6061-T6 FED SPEC SINGLE MATERIAL CLASSIFICATION RESPONSE INCLUDED CONTACT QUANTITY 16 SINGLE MATING END SINGLE CONTACT GROUPING INCLUDED CONTACT TYPE ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING SPECIAL FEATURES IN ORDER TO COMPLETE THE CONNECTOR ASSEMBLY,THE USER MUST OBTAIN/PROVIDE THE BACKSHELL. STANDARD VERSIONS MAY BE ORDERED AS NSN 5935-01-183-6491,P/N M85049/52-1-20W FOR THE STRAIGHT STYLE,OR NSN 5935-01-186-5610,P/N M85049/51-1-20W FOR THE RIGHT ANGLE STYLE. PRECIOUS MATERIAL AND CONTACT SURFACES GOLD LOCATION PRECIOUS MATERIAL AND 0.016 GOLD GRAINS, TROY WEIGHT PRECIOUS MATERIAL GOLD TEST DATA DOCUMENT 81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS TYPICAL, AVERAGE, NOMINAL, ETC.). THREAD SERIES DESIGNATOR UNEF SPECIFICATION/STANDARD DATA 96906-MS3476 GOVERNMENT STANDARD