Цифровой набор для сжигания дерева 100 Вт 78 шт. двойная ручка машина для пирографии инструмент для сжигания дерева

78 PCS Pyrography Burner is a 2-in-1 thermostatic LED digital display wood burning tool pyrography table. High Quality Pyrography Burner The wood burning kit comes with 2 soldering iron stand, the material of the soldering iron stand is a bakelite soldering iron stand, there is no problem with putting Pyrography burner pen which temperature over 300 degress. Temperature adjustment The wood burner is equipped with digital temperature adjustment, which provides precise temperature adjustment for different projects. The temperature adjustment range is 300~750°C. Add water to the included sponge to help cool and clean the tip. Soft and Comfortable Pen Equipped double ironing pen is designed to be very soft, reducing the strain during your painting process, and the handles of the two pens are made of heat-insulating material to ensure a comfortable painting experience when using. The color of wood burning The color of the wood burner has a lot to do with the material and density of the wood. You need to adjust the appropriate temperature according to the plank of your painting. When the burning shade is too light, turn up the temperature setting. This wood burner supports a temperature range of 300~750°C (572~1382°F). For common wood materials, we recommend setting the workstation around 500-650°C. If your plank is very tight, you may need a higher temperature, which you can test on the plank beforehand. Wire-Nibs Type-Pen2 Wire-Nibs Type-Pen2 is mainly used to install the detailed (line-pointed) pen tip. When using it, you need to press the pen tip in and then tighten the screw. It can be adjusted and used within the range of 300~750°C (572~1382°F). It is mainly used for Implementation of outlines, curves, shading, refinement, sculpting and other painting techniques. Solid Point Type- Pen 1 Solid Point Type- Pen 1 is mainly used to use solid nibs. The package is equipped with 26 solid nibs. At the same time, Pen 2 is also used to connect the blade and the tip of the soldering iron. It can be used in the range of 300~750°C (572~1382°F). It is mainly aimed at the realization of painting techniques such as heavy shadows, deep burns, and hot stamping. Note: 1. The tip of the Wire-Nibs Type-Pen2 should be inserted at least 1cm to avoid poor contact. 2. The Solid Point Type-Pen 1 and Wire-Nibs Type-Pen2 can only be used interchangeably, and the heating pen can be switched by the middle switch. Package Including Quantity Note 2-IN-1 Pyrography Burner 1 Detachable Wire-Nib Detailer (Pen 1) 1 Pyrography Tips (Wire Nibs) 33 – Use the storage box to prevent loss Detachable Solid-Point Pen (Pen 2) 1 Solid Tips (Solid Point) 26 – Use the storage box to prevent loss Pen Holder (Can be top-mounted) 2 Cleaning Sponge 2 – Keep moist for convenient cooling Tip Storage Box 2 Screwdriver 1 – For installing reinforcement pyrography tips Unfinished Wood Pieces 2 Letter/Number/Pattern Stencils 6 Tweezers 1 – For installing reinforcement pyrography tips